Avanti WTX4 Wireless Wall Remote Coding Instruction

Programming your Remote into the Motor

1. Open the white light cover on the Opener on the ceiling of your garage.

2. Quickly press and release the RED LEARN BUTTON – The LED light will flash slowly.

3. Select which button you wish to use on your remote and quickly press and release your SELECTED REMOTE BUTTON – The Led light will extinguish.

4. Quickly press and release your SELECTED REMOTE BUTTON AGAIN – The LED light will flash quickly.

5. On the next press of the remote the garage door will open.

Note: To code additional remotes, repeat steps 1-5

Clearing the Codes from your Motor

1. Open the white light cover on the Opener on the ceiling of your garage.

2. Quickly press and release the RED LEARN BUTTON – The LED light will flash slowly.

3. Press and hold the BLACK RUN BUTTON – The LED light will flash quickly.

4. All remote codes will be deleted when the LED light stops flashing When codes have been deleted, refer to step 2 under Code Learning above to recode remotes.