BOSS BRD1-9 Remote Coding

PROGRAMMING HANDSETSTO NEW CONTROL BOX

1) With the power turned onto the unit press and release the small button (learning button) and the yellow LED will come on indicating that your unit is ready to accept a code.
2) Press the handset button once. If the code is accepted the green LED will blink twice.* For multiple handsets code them in at this stage
3) Press and release the small button (learning button) and the yellow LED will go off.

DELETING HANDSETSTO NEW CONTROL BOX

To delete all codes

• Turn power off
• Press and hold down the small button (Learning Button) while you turn the power on the 3 LED’s will flashtwice indicating that all codes have been deleted.

To delete individual codes (you must have the handset that you wish to delete)

• With the power turned onto the unit press and release the small button (learning button) and the yellow LED willcome on indicating that you unit is in learn mode.
• Press the handset button twice. If the code is deleted the red LED will blink twice.
• Press and release the small button (learning button) and the yellow LED will go off.

Please see coding guide here Boss BRD1-9 Remote Coding