B&D CAD R Owners Manual

ABOUT YOUR B&D OPENER

Thank you for choosing a B&D automatic garage door opener. This automatic garage door opener has been
designed and developed in Australia by B&D Doors. The technically advanced construction of this B&D opener ensures you enjoy the following benefits:

• 5 year full parts and labour warranty on motor, electronics and mechanical components of the opener when installed by an authorised B&D Dealer (conditions such as having the garage door serviced annually also apply).
• Your own private security code with 3.486 billion available codes, meaning only you can open your garage door. Allows you to electronically program your security code at the touch of a button.
• Standard multi channel remote control transmitter allows you to operate other devices such as an adjoining garage door or entry gate if automated.
• Automatic safety reverse ensures personal protection from death or serious injury if trapped under a door while closing.
• Courtesy light automatically switches on for approximately 41/2 minutes when operating the door. Can be programmed to turn on and off from a remote control transmitter.
• Emergency disengagement release handle (red knob) for manual operation of the door in the event of a power failure.
• Automatic memory of all remote control transmitter codes and door travel limits after a power failure.
• No need to manually lock your garage door, as the opener ‘positively’ locks the door when closed.
• Automatically compensates for changes in door operating characteristics.
• Auto closing option can be programmed to close the door approximately 30 seconds after the door has opened. N.B. Safety Infra Red beams must be installed for this option to function.
• Flashing LED’s to easily identify operational problems or service requirements.
• An external antenna can be connected – for sites where radio range can be a problem.
• Vacation mode can be programmed to disable the radio receiver.
• Door Open Output – for those situations when you need to know when the door is open.
• Auxilliary Output – you can program a spare button of your remote control transmitter to operate this output to control items that can be switched using a momentary closed contact.

SPECIFICATIONS

Maximum Door Size and Door Load: 3000mm high Residential Rolling Garage Door or 2400mm high Wind Lock Residential Rolling Garage Door that does not exceed 200N (20kgs) bottom rail load. Supply Voltage: 220 – 240 volts AC – 50/60 Hz
Current: Maximum 3.5 Amps
Lamp: One 25 watt Pilot Lamp, on when door starts, off approx. 41/2 minutes later or can be programmed to operate from a remote control transmitter.
Limit Adjustment: Electronic
Remote Control Transmitter Frequency: 433.92 MHz
Powerhead Weight: 8.75 kgs
Auxilliary Power Supply: 12 volt, 100mA – protected by a 200mA polyfuse
Door Open Indicator Supply: Open collector isolated transistor, 30v, 100mA, connected to common when door is closed.
Auxilliary Output Supply: Opto-isolated transistor, 30v, 100mA, connected to common when activated.
External Aerial Connection: Female TV Coax Connector