BRD1A Manual
EASY OPERATION
To operate the door, simply press the programmed transmitter button once for two seconds. The door can be stopped during opening or closing by pressing this button again. The next activation will move the door into the opposite direction. Wall mount transmitter or wall switch (optional) can also activate the opener.
AUTOMATIC SAFETY REVERSE SYSTEM
If the door encounters object(s) during the closing cycle, it will automatically reverse. It will automatically stop while encountering object(s) during the opening cycle. The amount of force that the door should encounter before reversing or stop is adjustable and should be decided initially when the openers is first installed. The safety obstruction force test should be tested once a month (Refer to Installation Instruction on how to test).
COURTESY LIGHT
Courtesy light on the control panel automatically switches on for approximately 3 minutes when operating the door.
IN-BUILT BUZZER SOUND INDICATOR
For additional safety precaution, factory deafult see sound (low level sound) can be heard every time when the opener is activated. The sound could also be deactivated by following specific instructions.
TOTAL OPERATING TIME PROTECTOR
The opener has an in-built protection system. If the door does not fully open within 40 seconds, the opener will stop automatically. Otherwise, the opener will reverse if the door does not close fully in 40 seconds.
MANUAL RELEASE HANDLE
The opener is equipped with a Manual Release Handle. The door can be released from automatic operation into manual mode by simply pulling down the release cord handle. This will enable you to manually open or close the door. To switch back to automatic operation, just to push the handle up to the end to re-engage the unit.
AUTO CLOSE MODE AND SAFETY BEAM DEVICE (Optional)
The opener has an input terminal for the provision of a SAFETY BEAM device to be connected for additional safety protection. The door/opener could be set to close itself automatically when used in conjunction with an optional Safety Beam Device.
