Gliderol Glidermatic GTS-2000

Code Setting

Once the Key configuration is set you can now program in the security code from your hand transmitter(s)

• Press the learn code key once
• Learn LED indicator will light
• Press the hand transmitter Key 1 that will operate the door eg: for single door installation (A) you would press Key 1
• Learn LED will go out
• The hand transmitter is now programmed

Multiple Hand Transmitters
Repeat the above instructions for any subsequent Hand Transmitters.

The Control Module has enough memory for up to 15 individual Hand Transmitters.

If more than 15 handsets are learned the FIFO (First In First Out) system applies in first Hand transmitter code learnt will be deleted and replaced by the last Hand Transmitter code learnt.

Deleting Hand Transmitters From Memory
Press and hold the learn code key for 5 seconds.
All transmitter codes held in the memory have been erased.
Note: If a transmitter is lost or stolen please arease the memory and re-learn any spare or new transmitters.