ATA – ESV24alps Manual

EASY SLIDER SLIDING GATE OPENER V24

The ATA EasySlider Gate Opener consists of one sliding gate drive unit with integrated controller, two hand held transmitters and an antenna.

INTEGRATED CONTROLLER
The integrated controller is able to control one or two sliding gates. The supplied pre-wired antenna is ready to be mounted An outdoor type 240VAC power outlet is required to power the system. When two sliding gates are to be controlled the second drive unit (SLAVE) is connected to the first (MASTER) via a 5 wire low voltage cables. No 240VAC power is required by the SLAVE drive unit. When used with suitable glands the enclosure meets the IP33 standard for ingress of dust and water.

MECHANICAL DRIVE UNIT
The Drive unit consists of a powerful 24VDC motor, rugged gear assembly and position encoder. It also provides an key lockable disengaging lever.